How To I Install And Remove The Mixing Blade?Updated 2 years ago

Installing and removing the Mix Blade in your ChefPaw Blender is a simple process, but it requires caution due to the blade's sharpness. Here are the step-by-step instructions:

WARNING: The blade is sharp, so handle it with care to avoid any accidents or injuries. Also, avoid holding the blade while turning over the mixing bowl, as it may fall.

Installing the Mix Blade:

1) Attach the blade seal as pictured below to ensure a secure fit.

2) While gripping the upper part of the blade, carefully place it into the mixing bowl.

3) Lock the blade in place by rotating the latch on the underside of the mixing bowl clockwise until it is securely fastened.

Removing the Mix Blade:

1) Remove the mixing bowl from the main body, keeping the mixing bowl opening pointed upward.

2) Rotate the latch on the underside of the mixing bowl counterclockwise to unlock the blade.

3) With utmost care, pull the upper part of the mixing blade to remove it from the mixing bowl.

By following these instructions and paying attention to the provided warnings, you can safely install and remove the Mix Blade, allowing you to blend ingredients with ease and confidence. Happy blending and cooking with your ChefPaw Dog Food Maker!